PC-DMIS 2019 R1 Release yayında..!!
  • Anasayfa
  • Ara
    •  
  • Geriş
    • Kullanıcı Adı: Şifre:
      Aktivasyon epostanız mı yok?

Gönderen Konu: PC-DMIS 2019 R1 Release yayında..!!  (Okunma sayısı 172 defa)

plus minus reset

0 Üye ve 1 Ziyaretçi konuyu incelemekte.

PC-DMIS 2019 R1 Release yayında..!!
« : 02 Mart 2019, 13:30:35 »
PC-DMIS 2019 R1 Release

Resimlere izin verilmiyor. Üye Ol ya da Giriş Yap

İndirme linki ve sistem gereksinimleri aşağıdadır.

Linklere izin verilmiyor. Üye Ol ya da Giriş Yap

PC-DMIS 2019 R1 Recommended System Requirements

Operating System 
PC-DMIS 2019 R1 operates under 64-bit Windows 10, Windows 8.1, Windows 8, Windows 7, and Windows Vista. No other operating systems are supported. 

When you use third-party drivers, you should contact your local Hexagon Manufacturing Intelligence representative to ensure operating system compatibility. 
Running PC-DMIS inside a Virtual Machine (VM) is supported only if the VM supports OpenGL 3 or higher. 
PC-DMIS Vision machines do not support 64-bit Windows 8. The Matrox Framegrabber PC-DMIS Vision hardware component does not support a 64-bit operating system. 

Microsoft .NET Framework 
 If you do not have Microsoft .NET Framework 4.6.1 for Windows, the PC-DMIS installer will install it for you. 
 
RAM 
4 GB of RAM or higher 

The size of the CAD data file and the tessellation multiplier value used affect the amount of memory needed. These both affect the number of tessellated facets needed to display the model. The smaller the tessellation multiplier value used, the more memory needed for the facets. For large CAD models, this could cause an "Out Of Memory" error. If this occurs, the current PC-DMIS session will be left in an unstable state and should be terminated. 
The default tessellation multiplier value is 1.0. Setting a tessellation multiplier of 0.1 will result in a 10 to 20 percent increase in the memory required over the default value of 1.0. Decreasing the tessellation multiplier further to 0.01 will result in an additional 50 to 65 percent increase of memory required. 
1 GB of video RAM 
 
CPU 
2 GHz or higher quad core processor 
 
Graphics 

For desktops: NVIDIA Quadro K620 graphics card 
For laptops: NVIDIA Quadro K1100M graphics card 
For laptops running PC-DMIS with an RS4 laser sensor: NVIDIA Quadro M3000M graphics card with 4 GB of memory 
The graphics driver must support OpenGL 3.0 or higher. A warning message appears on PC-DMIS startup if the driver does not support OpenGL 3.0 or if your graphics driver is more than three years old. 

 
Hard Drive
2 GB of free hard drive space plus allocated virtual memory of eight times the largest CAD file used 
SSD drive, HDD 10K, or two disks in RAID 0 mode (high-performance hard disk drive) 

Display 
Screen resolution of 1280 x 1024 or higher 

Connectivity 

Two Ethernet ports. This may be required for specific installations in consideration of local needs, including but not limited to CMM systems where one port is required for controller communications and another for intranet/Internet communications. 
Two USB ports 
DVD drive 
A properly-configured LMS license or a HASP key (a physical USB portlock) 
Note: A HASP key does not act as general-purpose data storage; therefore, you cannot use a HASP key to store (download) arbitrary data from a computer. Similarly, you cannot use a HASP key to put (upload) arbitrary data on a computer. Also, only Hexagon Manufacturing Intelligence applications can read or write to a HASP key; other applications do not have this capability. As a result, you cannot use a HASP key to load and unload data to and from a computer.   

Browser 
Internet Explorer 10 or later 

 
Anti-Virus Software
Hexagon Manufacturing Intelligence used the Sophos anti-virus tool to test PC-DMIS 2019 R1. The user will need to confirm the performance of any other anti-virus tool. 
Linklere izin verilmiyor. Üye Ol ya da Giriş Yap   

Solutions for CMMs Using RS-232 Communications 
If you are installing PC-DMIS 2019 R1 on a new or existing computer, but you have an older CMM model that uses RS-232 communications, then you will need to install one of these solutions on your computer: 

An external RS-232 serial-to-USB adapter cable plus the serial-to-USB adapter cable driver 
An internal serial adapter card with serial ports 
Kişisel iletilere kapalıdır. Lütfen Linklere izin verilmiyor. Üye Ol ya da Giriş Yap konu açarak sorunuz.

Tibet atasözü
“Uzun yaşamak için; Yarısını yiyin, iki kat yürüyün, üç kat gülün, sınırsız sevin.!!”

 


PC-DMIS 2019 R1 Release yayında..!! Konusuna Ait Benzer Konular

PC-DMIS NC

Gösterim: 1595 - Yanıt: 2 - Başlatan:sozmen
PC-DMIS 2017 R1 Release

Gösterim: 1590 - Yanıt: 4 - Başlatan:# harek #
PC-DMIS 2018 R2 SP3 yayında

Gösterim: 779 - Yanıt: 5 - Başlatan:# harek #
PC-DMIS 2019 yenilikleri

Gösterim: 384 - Yanıt: 1 - Başlatan:# harek #



Sosyal ağınızla giriş yapın

 
 
Hoşgeldiniz Ziyaretçi. Lütfen giriş yapın veya kayıt olun.
  • Nokta Ziyaretçi: 30
  • Nokta Gizli: 0
  • Nokta Üye: 0

Çevrimiçi kullanıcı bulunmuyor.
  • stats Toplam Üye: 555
  • stats Toplam İleti: 8,284
  • stats Toplam Konu: 1,446
  • stats Toplam Kategori: 11
  • stats Toplam Bölüm: 38
  • stats En Çok Çevrimiçi: 84

En çok Yazanlar

BirazFikrimVar BirazFikrimVar
1,274 İleti
# harek # # harek #
1,065 İleti
Ⓜⓤⓡⓐⓣ Ⓜⓤⓡⓐⓣ
976 İleti
τǺN€®™ τǺN€®™
603 İleti
rebelwhiteâ©
220 İleti
metroloji16 metroloji16
214 İleti
adofm_AK
213 İleti
bakayoko
185 İleti
tarik
171 İleti
3_D
158 İleti

Takvim Aksiyonları

Mayıs 2019
Paz Pzt Sal Çar Per Cum Cmt
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 [25]
26 27 28 29 30 31

Popüler Kategeriler

'html_below' adlı tema yüklenemiyor.